Controlled Power Company has introduced the 700F Power Processor. 

• Front access only! All installation, operation, maintenance, and testing can occur from the front of the unit — no side or rear access required.
• 7-tap, microprocessor-controlled for tight voltage regulation, accuracy, and stability.
• Precisely maintains correct voltage to ± 3% within 1 cycle, and maintains regulation during extended brownouts.
• Extended input regulation range options including +10%, -40%; +15%, -25%; and +20%, -30%
• Low output impedance transformer minimizes voltage distortion and sags commonly associated with high surge currents.
• Triple-shielded isolation transformer provides a noise-free ground, attenuates voltage spikes and transients, and re-establishes the N-G bond.
• Internal manual bypass option maintains system isolation, voltage transformation, and power conditioning.
• Superior compatibility with dynamic loads.
• Increased surge capability, without the need for automatic bypassing, provides full-time power conditioning.
• High-efficiency design results in lower operating cost.

Technical Specs:

• Input Operating Voltage Range: +10%, - 20% from nominal (Extended regulation range options available.)
• Input Frequency: 60 Hz, ± 3%
• Input Power Factor: > .99 PF with resistive load
• Reflected Harmonics: Triplen harmonics are not reflected to the utility under non-linear loads
• Output Line Voltage Regulation: ± 3% from nominal
• Response Time: < 1/2 cycle
• Correction Time: 1 cycle
• Load Regulation: 2.5% typical, no load to full load
• Overload Rating: 200% for 10 seconds; 1000% for 1 cycle
• Common Mode Noise Attenuation: 146dB
• Transverse Mode: 3 dB down at 1kHz; 40 dB down per decade to below 50 dB with a resistive load
• Transient Voltage Suppression: Meets ANSI C62.41 Category B-3
• Efficiency: 96% - 97% typical, model and load dependant
• UL 1012 Listed, C-UL Listed to CSA C22.2, No. 107.1-01

Applications

• Pharmaceuticals / Labs
• Government / Commercial Buildings
• Broadcast Communications
• Telecommunications
• Concert Halls / Theaters
• Wastewater Treatment Plants
• Refineries / PetroChem
• Aerospace
• Printing Presses
• Industrial Lasers
• Pulp / Paper Mills
• Food Processing Plants
• UPS Bypass & Power Distribution